Update the Template Structure

Explanation

This activity is used to update the template structure with changes introduced by modifications. A modification may require,

• a change of the prime part for a particular position in the template structure
• one or more new structure positions to be added to the template structure
• the removal of an existing template structure position that was made invalid through the modification

Note that the required structure change must have been pre-registered on the modification (when it was in the Preliminary status) to be able to perform this activity. For more information refer the activities, Define a new Prime Part, Define a New Structure Position and Define the Structure Position to Remove.

Prerequisites

• The required template changes must have been registered on the modification.
• If a new prime part is defined for a new or existing structure position, this prime part must be a valid alternate for the chosen structure position.
• If an existing structure position is to be removed from the template structure, all serials and parts valid for that position in the structure must first be removed.

System Effects

• The template structure position is updated with the new prime part registered on the modification.
• The new structure position is added to the template structure and can be installed in serial structures. Note that the new template structure position is added to the template with a structure status of Preliminary. In order to become a valid position for use in the template, the status of the structure must be set to Active.
• The given structure position is removed from the template structure and can no longer be used in serial structures.

Window

Define Modification
Serial Structure Template
Template Structure Navigator

Related Window Descriptions

Define Modification/Structure Impacts/Template Changes
Serial Structure Template/Consist Of
Serial Structure Template/Multilevel
Template Structure Navigator/Consist Of
Change Prime Part
Add Structure Position
Remove Structure Position

Procedure

Use the following procedure to change the prime part for a structure position:

1. Open the Serial Structure Template window or the Template Structure Navigator window, and query (F3) for the necessary template.
2. Click the Consist Of tab.
3. Select the row containing the required structure position, right-click, and then click Change Prime Part. The Change Prime Part dialog box opens.
4. Enter the new prime part number in the Part No field. Use the List of Values to select a suitable value.
5. Click OK.

Use the following procedure to add a new structure position to the template structure:

1. Open the Define Modification window and query (F3) for the modification revision you want.
2. Click the Structure Impacts tab and then click the Template Changes sub tab.
3. Select the necessary row (containing the structure impact type New Structure Position), right-click and then click Add Position to Template. The Add Structure Position dialog box opens with the new structure position registered on the modification.
4. If needed, enter suitable values in the Position and Quantity fields. Note that the quantity you define can only exceed one (1), for the lowest level in the structure.
5. Select a suitable value from the Life Limited Part list. If the same value exists for the life limited part of the new structure position and the serial part, entering a value in this field is optional.
6. The check boxes in the Connect To Template Structure area illustrate how particular data for the new structure position can be defined. Following is a list of the available check boxes together with a description of what each check box is used to accomplish:

• Is this part of the Minimum Configuration? - This check box can be selected if you want the new part number and structure position to be included in the minimum configuration of the template.
• Create as separate template? - Select this check box if the new part is to be created as a separate template.
• Grant access to not installed serials? - Select this check box if you want disconnected serials (i.e., the serials for the part numbers that are assigned to the template structure of the new position) to automatically receive the template's access group(s).

7. Click OK.

Use the following procedure to remove an existing structure position from the template structure:

1. Open the Serial Structure Template window or the Template Structure Navigator window, and query (F3) for the necessary template.
2. You can either, click the Consist Of tab found in the above mentioned windows, or click the Multilevel tab in the Serial Structure Template window.
3. Select the row that consists of the structure position you want to remove, right-click and then click Remove Structure Position. The Remove Structure Position dialog box will open.
4. If you want to make the structure position obsolete, select the Make Position Obsolete check box.
5. Click OK.